Windows 10 user interface crash

shriyagu's picture

I have the iot starter kit(lte- m) .i plugged it to the pc with windows 10 and i think my user interface crashed. I could see mbed as a drive but it did not have any relevant file. I tried updating my bootloader but when i paste the bootloader image(bin file) at the target and unplug and again plug my device the name doesnot change to maintenance as mentioned in the blog. Also when i press reset and plug the usb to my pc the bootloader drive appears and while i paste the downloaded bin file to target the bootloader icon disappears in about 30 seconds . Please let me know how to proceed.

jflynn129's picture

Sorry for the difficulties, for the NXP board interfacing issues, it is probably  best to ask the MBED or NXP folks. I haven't had any issues myself, but I don't use windows 10 either but I suspect that the NXP guys have tested that configuration and could help give you some suggestions.