WICED_AWS SSID available but can't connect

Solved

The SSID is visible but I can't connect.

Terminal output is as follows:

Starting WICED v3.5.2
Platform BCM94343W_AVN initialised
Started ThreadX v5.6
Initialising NetX_Duo v5.7_sp2
Creating Packet pools
WWD SDIO interface initialised
WLAN MAC Address : B0:38:29:3D:3A:EB
WLAN Firmware : wl0: Nov 25 2015 12:57:14 version 7.45.45.1 (r602358) FWID 01-1920c040
Please wait, connecting to network...
(To return to SSID console screen, hold USER switch for 5 seconds during RESET to clear DCT configuration)

It never gets to  "IPV4 Network Ready" as the document suggests.  

Any ideas?

 

Well I re-flashed and rebooted the MCU, seems to be running now.  I'm having an interesting time at this so far...

Starting WICED v3.5.2
Platform BCM94343W_AVN initialised
Started ThreadX v5.6
Initialising NetX_Duo v5.7_sp2
Creating Packet pools
WWD SDIO interface initialised
WLAN MAC Address : B0:38:29:3D:3A:EB
WLAN Firmware : wl0: Nov 25 2015 12:57:14 version 7.45.45.1 (r602358) FWID 01-1920c040
Please wait, connecting to network...
(To return to SSID console screen, hold USER switch for 5 seconds during RESET to clear DCT configuration)
IPv4 network ready IP: 192.168.0.1
Setting IPv6 link-local address
IPv6 network ready IP: FE80:0000:0000:0000:B238:29FF:FE3D:3AEB
*******************************************************
Config SSID : WICED_AWS
Password : 12345678
IP Address : 192.168.0.1

PeterF's picture
PeterF
Moderator(16)

Connecting to WICED_AWS

 

Those last 3 lines in your console listing confirm the SoftAP mode is active. Make sure the computer you are using to connect to the module is connected to WICED_AWS before you address your browser to 192.168.0.1 

 

Thanks PeterF, I had marked as solved because it did seem to work after I bounced the board.