UDP Listen port

Solved

I have an IMS2. The command to set the UDP listen port is missing and/or if the parameter is hardcoded in the module it should be in the documentation. If you have no idea what i'm talking about and think that you can't call the device on demand search for this command on google AT#SLUDP

The IMS2 sends a @SOCKETDATAIND but it must have to listen first or it could never send this mesaage the TE

thank you

 

 

 

 

jflynn129's picture
jflynn129
Moderator(2)

The SOCKETDATAIND message is an unsolicited message that the WNC device sends when it has data to be read. Have you looked at https://github.com/Avnet/M14A2AGTTS_Example and/or https://github.com/Avnet/wnc14a2a-driver. It is a lot easier to use the WNC device via this driver (the Example project demonstrates its use).