Schematic that actually matches the kit I have

majorninth's picture

I have the BCM4343W IoT starter kit, but the getting reference design doc BCM943XXX and the schematic 03-BCM43364_Module referenced in the design documents refer to a different board. I'm trying to match the platform.h file that is actually used in the shadow.c example to the GPIO pins actually used to find a pin I can use for my project. Are any of these pins presented on the Arduino connector(s)?.


PeterF's picture

Please refer to page 12 of the Hardware User Guide for assistance on how Shield connector pinout maps to the WICED_GPIO port pin definitions in the ...\platforms\BCM4343W_AVN\platform.h file