Iot 2nd Gen

Solved
dmyancich's picture
dmyancich
Junior(0)

Received new starter kit today.

Iot Starter Kit 2nd Gen

Followed the quick start, but do not get blinking LED (attempting to connect to network)

Only the power led is lit.

Also, installed all the WNC software, and adb replies with "no devices found"

dmesg output:

[  435.219448] usb 2-1.1: New USB device found, idVendor=1435, idProduct=3182
[  435.219457] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  435.219462] usb 2-1.1: Product: Android
[  435.219467] usb 2-1.1: Manufacturer: Android
[  435.219471] usb 2-1.1: SerialNumber: WNC_ADB
[  435.249170] cdc_ether 2-1.1:1.0 usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 4e:cb:91:9c:fc:b4
[  435.251954] cdc_acm 2-1.1:1.4: ttyACM0: USB ACM device
[  435.257036] cdc_acm 2-1.1:1.6: ttyACM1: USB ACM device
 

Do I have a hardware failure?

Thanks.

jflynn129's picture
jflynn129
Moderator(2)

Did you install the adb security key?  The training videos at http://cloudconnectkits.org/product/lte-starter-kit-2 walk you through the setup process and talk about ensuring the security key is installed.